Mechanical hardness testing is fundamental in the evaluation of the mechanical properties of metallic materials due to the fact that the hardness values allow one to determine the wear resistance of the material involved, as well as the approximate values of its ductility, flow tension, among a number of other key characteristics. As a result, the main objective of the present work has been the...

ADVANCED MATERIALS & PROCESSES • APRIL 2012 I n 1925 in the UK, Smith and Sandland developed an indentation test that used a squarebased pyramidal-shaped indenter made of diamond[1]. The test was developed because the Brinell test (introduced in 1900), which (until recently) used a round hardened steel ball indenter, could not test steels harder than ~450 HB (~48 HRC). They chose this shape wit...

In the current study, the sources of variation in the mean hardness value of heat treated aluminum 2024 samples were identified by using metallurgical study and design of experiment methodology (full factorial method). Hardness measurements and microstructural investigations of the samples were carried out using Brinell hardness test and optical microscopy, respectively. The effects of several ...

The effects of thermomechanical densification (TMD) and heat treatment on density and Brinell hardness of Scots pine (Pinus sylvestris L.) and Eastern beech (Fagus orientalis L.) woods were investigated. Samples were densified using a specially designed hydraulic press with target compression ratios of 20 and 40%, and at 110 °C and 150 °C. Then, the heat treatment was applied to the samples at ...

Different hardness measures as Vickers, Brinell and Meyer hardness are discussed with respect to their physical interpretation. Meyer hardness is found to be best suited as a measure of plastic properties. The outline of a depth sensing nanoindentation experiment is described, and particular emphasis is given to the correct deduction of the contact area from indenter penetration data. Experimen...

In this paper, aluminum alloy samples were fabricated by selective laser melting (SLM) and subsequently T2 heat treatment was undertaken. In order to obtain comprehensive results, various experiments on densification, hardness, tensile strength, bending strength and microstructure characterization were carried out. The results show that densification of samples after T2 heat treatment does not ...